Keysight Technologies 3458A Guide D'utilisation page 431

Procedure to Lock Out Front/Rear Terminals and Guard Terminal Switches
7 Refer to
For safety purposes and proper operation, it is very imperative that the cover
WARNING
grounding screws be reinstalled.
8 Refer to
9 Refer to
10 Reinstall the right side handle strap. Use the #1 Pozidriv to reinstall side
11 Your instrument is now ready for use. Keysight suggests that after you apply
Keysight 3458A User's Guide
Figure C-3. Turn the instrument so its left side faces you. Use the
#TX10 Torx driver to reinstall the top and bottom covers ground screws.
Figure C-2. Reinstall the left side handle strap. Use the #1 Pozidriv to
reinstall side handle strap screws.
Figure C-1. Turn the instrument so its right side faces you.
handle strap screws.
power that you perform an automatic calibration on the instrument. To do this.
use the "ACAL ALL" command.
C
431