Keysight Technologies 3458A Guide D'utilisation page 248

6 Command Reference
CONT
Continue. Resumes execution of a subprogram that has been suspended by a
PAUSE command.
Syntax
CONT
Remarks
– The GPIB Group Execute Trigger function may also be used to resume
– Only one subprogram will be preserved in a suspended state. If a subprogram
– Related commands: PAUSE, SUB, SUBEND
Example
OUTPUT 722;"CONT" !CONTINUE SUBPROGRAM EXECUTION
CSB
Clear status byte. Clears (sets to 0) all bits in the status register.
Syntax
CSB
Remarks
– If a condition that set a bit in the status register still exists, that bit will be set
– When you clear bit 6 (service requested), the multimeter sets the GPIB SRQ
– Related commands: RQS, SPOLL (GPIB command), STB?
Example
OUTPUT 722;"CSB" !CLEARS THE STATUS REGISTER
248
execution of a suspended subprogram.
is paused and another is run which also becomes paused, the first will be
terminated and the second will remain suspended.
again immediately after the CSB command is executed.
line false.
Keysight 3458A User's Guide