HBM PMX Manuel D'emploi page 89

Quick Start
3 Divider (divider)
Function
Inputs
Outputs
Parameters
Default
Exception handling
4 2:1 multiplexer (mux2_1)
Function
Inputs
Outputs
Parameters
Default
Exception handling
5 6th-order filter (iir6)
Function
Inputs
Outputs
Parameters
Default
Exception handling
A3257−2.0 en/de/fr
Division y = Dividend / Divisor
Inputs dividend, divisor
dividend: Constant 1.0
divisor: Constant 1.0
If one or a number of inputs is marked as invalid (Invalid
bit), the output is also marked as invalid. The computation
is nonetheless done and output .
If out of range, Not-a-Number (+/- inf) is output.
Multiplexes two inputs to one output controlled via digital
Control input muxBitId
in0, in1 combined with constant 0.0
muxBitId combined with constant low
The output's Invalid bit follows the currently selected in-
Signal to be filtered in0
Filtered signal out0
- Cutoff frequency fc (-3 dB damping)
- Characteristic: Bessel or Butterworth
- Type: low pass or high pass
fc: off (filter ineffective) Bessel, low pass
If the input is marked as invalid (Invalid bit), the output is
also marked as invalid.
Filtering is nonetheless done and output .
If out of range, Not-a-Number is output.
Quotient out0
input
low: out = in0
high: out = in1
Inputs in0, in1
Output out0
put's Invalid bit.
Filters a signal
89