Typical Operating Procedure; Measurement Example - HBM PMX Manuel D'emploi

Masquer les pouces Voir aussi pour PMX:

Table des Matières

10.1 Typical operating procedure

The easiest way to configure the PMX measuring amplifier and its measure-

ment channels is via the PMX web browser. The sensors, Ethernet cable and

voltage supply must be properly connected (see Sections 7.3 and 7.2).

Connect the PMX to a PC (HOST) (see Section 9.3), to see the device over-

The entire device, with all its measurement cards and signals, as well as all

the device information, is realized here.

Switch to the Administrator level

(may be password-protected), then via

the menu button

to > Settings > Amplifier.

Alternatively, clicking on the required channel or function (e.g. LIMIT

SWITCHES) directly calls up the corresponding settings menu. This requires

authorization for the respective user levels.

A3257−2.0 en/de/fr

Table des Matières