HBM PMX Manuel D'emploi page 481

Jeu de commandes
CDV?
Output zero displacement of input characteristic for all selected channels
(PCS / SPS)
Syntax : CDV?(x)
Parameter: none
Response: q1(y): current zero point value in displayed units
e.g. 0.01,0,10.5,10.502
Virtual subchannels (channel 9) do not support "dead load values". q1=0.
ATB
Writes a 64 bit integer value which can be read by the fieldbus master
Syntax: ATBp1 (x)
Parameter: p1: 64 bit integer value
Format of p1 can be a decimal value e.g. 87612398745 or a
hex value
e.g. "0xaa12bb34cc56dd78" which has to be entered as string
with "0x" as prefix
Note: Response depends on SRB command
ATB?
Outputs current 64 bit integer value in hex which was written with ATB com­
mand before
Syntax : ATB?(x)
Parameter: none
Response: q1(y): current value written with ATB command in hex
e.g. 0xab12
A3257−2.0 en/de/fr
Calibration Dead Load Value Query
Application To Bus
Application To Bus Query
.
145