Mounting/Dismounting/Replacing; Support Rail Mounting - HBM PMX Manuel D'emploi

26
6

Mounting/Dismounting/Replacing

6.1 Support rail mounting

Allen screw
2
3
Fig. 6.1: Mounting on a support rail
Undo the four back-panel screws (cross-recess M3x8) (1)
Slide the side panels forward (2)
Screw on the support rail mounting (3) (approx. 5 Nm), in a choice of four
positions (two positions for the 7.5 mm support rail), see Fig. 6.2)
Screw the side panels (2) back on
3 mm
4
Mounting
1
A3257−2.0 en/de/fr