HBM PMX Manuel D'emploi page 139

Commands
HPV?
Syntax1: HPV?p1(x)
Parameter: p1: peak value store, 1 (Max), 2 (Min) or 3 (Peak-Peak)
Response: q1,q2(y):
q1: requested peak value store
q2: 1: updating suspended
0: updating enabled: e.G. for Max (p1=1) 1,1
::
Max, Min or Peak-Peak values
Syntax 2: HPV??(x)
(y): available peak value stores : e.G. 1,2,3
that this subchannel (between the two
The command returns the peak value store status which can be set by the
HPV command.
Virtual subchannels (channel 9) do not support peak values.
SAD
Syntax: SAD p1,p2,p3(x)
Parameter:
p1
p2
p3
Tab.1: Bridge excitation voltage (p1)
A3257−2.0 en/de/fr
Hold Peak Value Query
Read out peak value store updating status of all selected channels
(PCS / SPS)
means that this subchannel (between the two
Sensor Adaption
Select transducer adaptation for all selected channels (PCS / SPS)
Excitation voltage (or current), see tables 1 to 4
Transducer type, see table 5
Sensitivity (optional) , see table 6
Status Value
No supply 10
1V 11 Not supported
1.25V 12 Not supported
2.5V 13
5V 14 Not supported
10V 15 Not supported
2-20mA 16 Not supported
0.2V 17 Not supported
0.5V 18 Not supported
Remarks Command
PX401
PX455
1,0 1,1
: ::
) has no
:
1,2 1 means
: :: ::
) has no peak values
:
139