Profinet - HBM PMX Manuel D'emploi

Communication

11.5 PROFINET

− Network settings
The PROFINET-related network settings (IP address, device name, etc.)
are selected using the PROFINET configuration tool and set via the
PROFINET cable. These data can be read for checking in the "Fieldbus"
dialog of the PMX user interface.
− The PROFINET configuration must match the installed PMX cards.
Example
Installed in PMX
PROFINET
configuration
A3257−2.0 en/de/fr
Slot 1 Slot 2
PX878 PX455
No data for PX455
PROFINET.
Leave this slot
empty, see
below.
Slot 3 Slot 4
PX401 empty
PX401 empty
107
Slot 9 (virtual)
Calculated
channels
Number of
calculated
channels must
match the PMX
setting (Fieldbus
menu).