HBM PMX Manuel D'emploi page 82

82
Quick Start
4. Connect the PMX to a PC (HOST) (see Section 9.3)
The configuration software (PMX web server) is implemented in the PMX, and
does not have to be installed (see Chapter 9 for more information).
To operate current versions of the PMX devices, you need a terminal (e.g. PC
/ tablet with a mouse) with a common Internet browser (Internet-Explorer (Ver-
sion > 9.0), Firefox or Chrome) and a screen resolution of min. 1024 x 768.
The PMX is set to DHCP (automatic address assignment) at the factory. Set
the PC (HOST) to DHCP as well. Automatic adjustment and setting of the IP
addresses will then follow. This process takes a few seconds.
Call the PMX web server by entering "PMX" in the browser bar and press RE-
TURN.
The PMX announces itself with a start screen (Overview)
The PMX system is now ready for measurement and you can see live meas-
ured values.
A3257−2.0 en/de/fr