Error Table For Error Messages; Error Code Series 100 - Ecolab EcoAdd Manuel D'utilisation

10.2

Error table for error messages

10.2.1

Error code series 100

If an error message is triggered, the display on the pump shows an ALARM
together with the error code and a cause. The background of the display is
shown in red and the error message must be acknowledged
right.
NOTICE!
With some error messages the pump should always be sent to the
customer service department as it is only possible to access the level of the
control to which these messages relate. The
pumps to Customer Service.' on page 149 should be observed!
Fault description Cause
Error 100 Error opening file on internal file system.
Error 101 Error setting file pointer on internal file
system.
Error 102 Error reading file on internal file system.
Error 103 Error writing file on internal file system.
Error 104 Error switching directory on internal file
system.
Error 105 Error creating directory on internal file
system.
Error 106 Error querying file size on internal file
system.
Error 107 Error closing file on internal file system.
Error 108 Error finding file on internal file system.
Error 109 Error deleting file on internal file system.
Error 110 Error renaming file on internal file system.
Error 199 Error initialising internal file system.
Operational malfunctions / troubleshooting
Ä 'Information about sending
Remedy
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
Send pump to Customer Service.
151
at the top
417102276 Rev. 5-02.2020