Ecolab EcoAdd Manuel D'utilisation page 285

Software setting:
1
5
11
Fig. 37: Software setting: 'Pulse'
1. [Main menu] Press the
ð The 'Main menu' screen is displayed.
2. [Operating mode] .
ð The screen for setting the [Operating mode] is displayed.
3. [Pulse] .
4.
[ Click Next] to save the setting.
ð The screen for setting the 'Pulse interval' is displayed.
5. Enter the quantity in litres (before the decimal point) using the scrollbar.
6. 'Select quantity after the decimal point' .
7. Enter the quantity in litres (after the decimal point) using the scrollbar.
8. [Click Next] to save the setting.
ð The screen for selecting the 'pulse memory' is displayed.
9. 'Select pulse memory' .
ð If the 'pulse memory' is active, a ü is displayed in the selection field.
10. [Click Next]
to save the setting.
ð The screen for setting the 'concentration solution' is displayed.
11. Enter the concentration in % (before the decimal point) using the scrollbar.
12. 'Select concentration after the decimal point' .
13. Enter the concentration in % (after the decimal point) using the scrollbar.
14. Pressing the button saves and returns to the[Operating mode].
15. Pressing the button returns to the [Main menu].
16. By pressing the
6
7
12
13
button.
button, you can return to the [operating display].
83
Control / Software
2
8
9
14
417102276 Rev. 5-02.2020
4
3
10