Operating Mode] [Manual]; Operating Mode [Manual] (With 'Metering Enable' ) - Ecolab EcoAdd Manuel D'utilisation

7.9.1

[Operating mode] [Manual]

With the [Operating mode] [Manual] the required metering rate is set manually.
After switching on, the pump runs at the metering frequency corresponding to the selected
metering rate.
The metering rate can also be changed in ongoing operation:
Ä Chapter 9.3 'Set or reset the pump capacity in L' on page 140.
Fig. 31: Operating mode: Manual
[Manual] - select:
1. [Main menu] :
2. [Operating mode] - select.
ð Screen switches to the selection level [Operating mode].
3. 'Select Manual' :
4.
Pressing the
ð The screen switches to the overview: [Main menu].
5. Press the
ð The screen switches back to the [Operating display] .
7.9.2

Operating mode [Manual] (with 'metering enable' )

Terminal assignment:
Fig. 32: Terminal assignment: Floating contact
2
Ä Chapter 7.7 'Main menu' on page 73
button saves the setting.
button.
79
4
3
Control / Software
417102276 Rev. 5-02.2020