Ecolab EcoAdd Manuel D'utilisation page 327

Switch on monitoring for diaphragm breakage:
Fig. 73: Switch on monitoring for diaphragm breakage
Factory setting: Monitoring for diaphragm breakage switched off
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Use the scrollbar to scroll to the [menu item Diaphragm breakage] .
4. [Select Diaphragm breakage] .
ð Screen switches to the query 'With diaphragm breakage' .
5. If required, select 'With diaphragm breakage' .
6.
Pressing the button saves the setting.
ð The screen switches to the overview: [Configuration].
7. By pressing the
8.
By pressing the
4
3
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
button, you can return to the [main menu].
button, you can return to the [operating display].
125
Control / Software
6
5
417102276 Rev. 5-02.2020