Operating Mode - Ecolab EcoAdd Manuel D'utilisation

Control / Software
7.9

Operating Mode

Selecting the operating mode sets whether the pump is operated using internally set
values (manual, timer) or if an external signal determines the dosage rate (pulse, current).
Fig. 30: Overview: Operating mode
Factory setting: Manual
[Operating mode] :
1. [Call up the main menu] :
2. [Operating mode] .
ð Screen switches to the selection level [Operating mode].
3. Select [Operating mode] - setting:
Manual
n
Ä Chapter 7.9.1 ' [Operating mode] [Manual]' on page 79
n Pulse
Ä Chapter 7.9.3 'Operating mode [Pulse]' on page 81
n Current
Ä Chapter 7.9.4 '[Operating mode] [Current]' on page 87
n Timer
Ä Chapter 7.9.5 '[Operating mode] [Timer]' on page 89
– Seven-day programme
Ä Chapter 7.9.5.1 '[Operating mode] - [Timer]
[Select Seven-day programme] .' on page 89
– Interval programme
Ä Chapter 7.9.5.2 '[Operating mode] [Timer] [Set Interval programme] .'
on page 91
4. Pressing the
ð The screen switches to the overview [Main menu].
5.
Press the
ð The screen switches back to the [operating display] .
417102276 Rev. 5-02.2020
2
Ä Chapter 7.7 'Main menu' on page 73
button saves the setting.
button.
78
4
3