Display View During Ongoing Operation (Example) - Ecolab EcoAdd Manuel D'utilisation

7.4

Display view during ongoing operation (example)

10
11
Fig. 23: Operating indicator (example)
Pos. Description
Pump name
1
Ä Chapter 7.10.1 'Pump name' on page 93
Maximum metering output in l/h (depending on the selected metering mode)
2
Ä Chapter 7.8 'Metering mode' on page 74
Metering mode (s, m, l, v)
3
Ä Chapter 7.8 'Metering mode' on page 74
Level display of the metering container
4
Ä Chapter 9.4 'Changing a container - Empty signal' on page 140
Maintenance display
5
Ä Chapter 9.5 'Confirm the pump service' on page 145
6
Display of access code
Variable status displays (OGM, calibration, batch, external enable, access code, Bluetooth, etc.)
7
Ä Chapter 7.4.1 'Symbols in operating mode' on page 70
Current, day, date and time
8
Ä Chapter 7.10.2 'Date / time' on page 94
9 Test button for manual metering and to bleed the system
Menu button for calling up the settings
10
Ä Chapter 7.7 'Main menu' on page 73
11 Start button in standby position ("ON" operating mode)
12 Display of the current percentage metering capacity
Current metering capacity
13
Ä Chapter 9.3 'Set or reset the pump capacity in L' on page 140
Current operating mode
14
Ä Chapter 7.9 'Operating Mode' on page 78
Metered chemical setting
15
Ä Chapter 7.10.10 'Metering chemical' on page 107
The pump is operated via the Start button
If the pump is in operation, the [metering mode background] (pos. 3) flashes, and the Start
button (pos. 11) changes to the Pause button
1
15
14
13
12
9
7
8
/ and elapsing timer for short-term cancellation of access code.
69
3
2
4
5
6
(pos. 11).
.
Control / Software
417102276 Rev. 5-02.2020