Pump Name - Ecolab EcoAdd Manuel D'utilisation

7.10.1

Pump name

Under menu item "Pump name" an individual name can be entered, which is then shown
in the display.
Fig. 45: Configuration: Pump name
Factory setting: No name allocated.
[Pump name] - setting:
1.
[Call up the Main menu] :
2. [Select Configuration] :
3. [Select Pump name] .
ð The display switches to the screen for viewing or editing the pump name.
4. Change the name of the pump with the scrollbar
buttons, selection fields, number and text input' on page 67 as described below.
5.
Press the
ð The screen switches to the overview: [Configuration].
6. By pressing the
7. By pressing the
3
4
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
An existing name that is to be changed or incorrectly entered
characters can be removed with the delete button
button to save the [Pump name].
button, you can return to the [main menu].
button, you can return to the [operating display].
5
Ä Chapter 7.3.3 'Scrollbars, radio
93
Control / Software
.
417102276 Rev. 5-02.2020