Oval Gear Meter - Ecolab EcoAdd Manuel D'utilisation

7.10.14 Oval gear meter

In case an oval gear meter is connected to the pump for metering control (depending on
the setting in the submenu items), the way in which the incoming pulses are processed
can be selected.
To assemble the OGM
10~13 as shown in
PLUS
meter OGM
OGM
Test the connection of the oval gear meter:
To detect the OGM
connection to the pump and re-connected so that the pump re-initialises
itself.
In the Pump menu, the oval gear meter function is automatically enabled
under Configuration and the metering controller and metering monitoring
functions can now be selected.
PLUS
, disconnect the power supply and connect it to the terminals
Ä Chapter 6.4.6 '[Flow] Metering monitoring (e.g. with oval gear
)' on page 59 .
PLUS
PLUS , the supply voltage must be disconnected after
To check that an appropriate oval gear meter
PLUS
(type (OGM
pump, the operating screen displays the symbol
for the oval gear meter (OGM
meter) once the software detects this.
119
Control / Software
) is connected to the metering
PLUS
= oval gear
417102276 Rev. 5-02.2020