Service Interval] - [Variable] - Ecolab EcoAdd Manuel D'utilisation

7.10.11.1 [Service interval] - [Variable]

Fig. 64: Service interval - variable
After selecting [Service interval] - [Variable] the setting is saved by clicking the
button. The screen switches to the configuration overview.
[Select Service interval] - setting:
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Using the scrollbar on the right side of the screen, scroll to the
[setting Service interval] and select.
4. 'Select Variable' .
ð The selection field 'Variable' is marked.
5.
[ Click Next]
ð Screen change for the setting: 'Service interval' / 'Weeks' .
6. Enter the number of weeks with the scrollbar.
7.
Press the
ð All settings are saved, and the screen switches back to the configuration
overview.
8. By pressing the
9.
By pressing the
3
4
2
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
to save the setting.
button.
button, you can return to the [main menu].
button, you can return to the [operating display].
5
6
113
Control / Software
7
417102276 Rev. 5-02.2020