Ecolab EcoAdd Manuel D'utilisation page 270

Control / Software
Input numbers:
2 1
3
6
4
5
Fig. 21: Example: Input field
Numbers can be input in fields which are highlighted in dark colours (pos. 2).
To select a field for input, touch the required input field.
Fields which are not selected (pos. 1) are shown with the same background as the actual
display.
By touching and moving the controller (white dot) on the scroll bar (pos. 5) or by touching
the symbols or the numerical value can be changed.
The value is lowered by moving it is a minus direction (pos. 4) and raised by moving it
towards plus (pos. 6). The possible input is given above the scroll bar (pos. 3).
Once you have set the first field, touch the next field (1) to continue the configuration
process.
Text input:
1
2
3
5
6
4
Fig. 22: Example: Text input
Touch and move the controller (white dot) on the scroll bar or touch the symbols or
to enter the required text (letter or number appears enlarged in the selection window).
Then tap the selected number / letters in the selection window, and the selection will now
be displayed in the text box. Other letters available for selection (pos. 5) are displayed
after the selection window (pos. 4).
When you select chemicals from the internal pump database, the letter selection (5)
speeds up the entry of words by displaying only the letters available for use.
If you make a mistake during input, you can delete the last letter again by pressing the
Delete button (pos. 3). You can clear the entire input field (pos. 2) by keeping the button
depressed.
417102276 Rev. 5-02.2020 68