Main Menu; Open The Main Menu; Metering Mode - Ecolab EcoAdd Manuel D'utilisation

7.7

Main menu

If the [access code] is enabled
Ä Chapter 7.7 'Main menu' on page 73.
7.7.1

Open the main menu

1
Fig. 26: Calling up the main menu without an access code
1.
[Open main menu] by pressing the [Menu button]
ð The screen changes to the [Open main menu].
2. Use the [scrollbar] on the right-hand side of the screen to scroll to the required
setting and select it.
3. Press the
operation screen.
The following menu items can be accessed:

Metering mode:

n
Ä Chapter 7.8 'Metering mode' on page 74
n Operating mode:
Ä Chapter 7.9 'Operating Mode' on page 78
n Configuration:
Ä Chapter 7.10 'Overview - Configuration' on page 92
n Calibration:
Ä Chapter 7.11 'Calibration' on page 126
n Operating data:
Ä Chapter 7.12 'Operating data' on page 128
Info:
n
Ä Chapter 7.13 'Info' on page 129
button to exit the [Main menu] again. The pump switches back to the
73
, please note the following:
3
2
.
Control / Software
417102276 Rev. 5-02.2020