Maintenance Mode - Service Position Of The Pump - [Pump Service] - Ecolab EcoAdd Manuel D'utilisation

Servicing
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
Maintenance and repair work may only be performed by authorised and
trained specialist personnel in compliance with current local regulations.
The safety regulations and required protective clothing (PPE) must be
complied with when working with chemicals. Attention must be paid to the
information included on the product data sheet of the dosing medium used.
During or prior to maintenance and repair work:
– Use only original spare parts.
– Depressurise the pressure line.
– Disconnect the dosing medium supply and clean the system thoroughly.
– Unplug the mains plug or disconnect the pump from all power sources,
and secure against accidental re-activation!
11.1

Maintenance mode - Service position of the pump - [Pump service]

Before maintenance work is permitted to be performed on the pump,
the pump should be changed to maintenance mode.
This causes the motor and the diaphragm to be reset, simplifying the
maintenance work!
157 417102276 Rev. 5-02.2020