Description Of The Pump; Identification Of The Pump - Type Plates; Control Elements 'Ecopro - Ecolab EcoPro Manuel D'utilisation

Description of the pump

5 Description of the pump
1
2
3
4
5
Fig. 2: Assembly 'EcoPro'
1 Operator panel
2 Rotary operating device
3 Pressure connection / pressure valve
4 Pump head
5.1

Identification of the pump - Type plates

The pump is fitted with a type plate that provides the pump-specific data for identification.
The type plate is located on the front of the pump at the bottom (Fig. 2, pos. 8) and will be
explained in Fig. 2 .
5.2

Control elements 'EcoPro'

Fig. 3: Control elements 'EcoPro'
1 Rotary button for stroke adjustment
2 Locking mechanism for fixing the rotary button in place
3 LED - Alarm signal, colour: red flashing
4 LED - Metering mode "low", colour: Yellow
LED - When starting the pump: green (standby)
417102264 Rev. 6-12.2019
6
7
8
8
4
6
5 Suction connection / suction valve
6 Cable bushings and connections (behind display cover)
7 Mains cable bushing / Mains connection
8 Position of type plate
1
2
3
5
7
5 LED - Metering mode "high", colour: Flashing yellow
6 On/off switch
7 Test button
8 Cable bushing for the mains connection cable
28