Unauthorised Modification And Spare Parts Manufacture; Metering Media - Ecolab EcoPro Manuel D'utilisation

Safety
2.2.2

Unauthorised modification and spare parts manufacture

CAUTION!
Changes or modifications to the system are not permitted without the prior
written consent of Ecolab Engineering GmbH and will result in the loss of
any warranty claims. Under no circumstances should changes or
modifications be made to the electrical circuits, hydraulic circuits or safety
devices of the system without the prior written consent of Ecolab
Engineering GmbH.
Unauthorised changes or modifications are only permitted with prior
permission and require the consent of the manufacturer.
Original spare parts and accessories approved by the manufacturer serve
to increase safety. The use of other parts excludes the warranty for the
consequences resulting from this.
We would like to point out that in the case of subsequent changes the
CE conformity must be reassessed and reissued!
CAUTION!
Unauthorised modifications or changes are only permissible following
discussion with and the approval of the manufacturer.
Original spare parts and accessories authorised by the manufacturer
ensure safety.
The use of other parts excludes liability for the consequences arising
from this.
2.3

Metering media

CAUTION!
Use of metering media:
– The metering system may only be used with products that have been
validated by Ecolab.
– The materials/media to be deployed for the intended use of the machine
are to be procured and used by the owner/operator.
– Correct handling of these materials/media and the risks involved are the
sole responsibility of the owner/operator.
– Hazard warnings and disposal instructions must be provided by the
owner/operator.
– When dealing with the metering medium, use suitable protective
clothing (see the material safety data sheet for the metering medium).
– All safety regulations for the handling of chemicals must be maintained
and the information contained in the material safety data sheet/product
data sheet of the metering medium must be observed.
Liability is not accepted if invalidated products are used!
417102264 Rev. 6-12.2019 16