Storage; Equipment Marking - Rating Plate; Warranty - Ecolab EcoPro Manuel D'utilisation

General
1.5

Storage

Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be complied with accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature: +5 to 40° C.
n Relative humidity: max. 80 %.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly. If necessary, refresh or renew the preservative.
1.6 Equipment marking – Rating plate
Information on equipment marking or the information on the identification
plate can be found in
on page 82. It is important for all queries to state the correct name and
type. This is the only way of ensuring fast and accurate processing of your
enquiry.
1.7

Warranty

The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
Only OE spare parts must be used for repairs.
n
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to
the product.
The warranty and service conditions of the manufacturer also apply.
417102264 Rev. 6-12.2019
Ä Chapter 13.2 'Equipment marking / Rating plate'
12