Mounting And Installation; General Information And Safety - Ecolab EcoPro Manuel D'utilisation

6

Mounting and installation

Personnel:
Protective equipment:
6.1

General information and safety

NOTICE!
General instructions for installation and assembly:
– The pump must be installed at an easily accessible, frost-protected
location.
– The ambient conditions given in the "Technical data" must be observed.
– The pump must be installed in a horizontal position.
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
– All installation, maintenance and repair work may only be performed by
authorised and trained experts in accordance with valid local
regulations.
– The safety regulations and the required protective clothing when
working with chemicals must be complied with. Attention must be paid
to the information included on the product data sheet for the metering
medium used.
– The metering medium supply must be isolated and the system cleaned
prior to installation, maintenance and repair work.
Personal protective equipment
DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. The personnel who set up and install the pump must use
suitable PPE to protect against injury.
n Mechanic
n Qualified electrician
n Service personnel
n Specialist
n Protective gloves
n Protective eyewear
n Safety shoes
31
Mounting and installation
417102264 Rev. 6-12.2019