Confirm The Pump Service - Ecolab EcoAdd Manuel D'utilisation

9.5

Confirm the pump service

Provided that an access code has been set in the pump, the pump
servicing can only be done with the access authorisation 'Administrator' !
Symbol Description of service displays
Service info with blue background: No servicing required
Service info with orange background: Advance notice of a servicing
Service info with a red background: Servicing overdue
Fig. 87: Confirm the pump service
1. In order to confirm a service, click the 'Servicing symbol on the' operation screen
2. This step can be skipped if there is no password query here.
ð The screen switches to the query for: 'Pump service' .
3. By pressing the Cancel button
again.
ð The service has not been reset, and the operation screen is displayed.
4.
By pressing the OK button
again, and the operation screen is displayed.
5. The operation screen now shows the new servicing time suitable to the material
pairing of the pump under
2
1
To enter the setting, press the displayed 'Servicing symbol on the'
operation screen
If you have activated an [access code]
Ä Chapter 7.7.2 'Open the main menu with the access code
activated' on page 74.
, the information screen that is displayed is closed
Ä Chapter 7.10.11 'Service interval' on page 112 .
3
4
, note the following:
, the information screen that is displayed is closed
145
Operation
5
417102276 Rev. 5-02.2020