Operating Mode; Selection; Operating Mode / Internal - Ecolab Elados EDPL V60 Notice Technique

10.3

Operating mode

10.3.1

Selection

Open main menu as descripted at chapter
key. Acknowledge your choice with the Start/Stop key. If you push the  and  keys at
once (Function: „Menü Exit") you get back to operating mode.
10.3.2

Operating mode / Internal

The "internal" operating mode can be used to operate the metering pump without external
signals.
The following display options can be selected:
• Strokes/min
• Percent
•
Litres*
10.3.2.1 Selection
Fig. 10.6
417102214_EDPL_V60.docx
Fig. 10.5
The configured metering speed (and thus the metering quantity)
is displayed in strokes/min. (Default setting)
The configured metering speed (and thus the metering quantity)
is displayed in percentage terms.
The configured metering quantity is displayed in litres / h
(optionally also in gallons / h or gallons / day).
* For information about conversion from litres to gallons, see
10.1 and go to operating mode
Settings:
• Internal
• Pulse
• Current
86
by using the 
see chapter:
10.3.2
10.3.3
10.3.4
10.4.4 "Configuration / Unit".
Rev. 1.12.11