Safety; Safety Notes; Emphases; Numberings - Ecolab Elados EMP II - E10 Notice Technique

2

Safety

CAUTION
The safety Notes and emphases must be observed at all times!
WARNING
2.1

Safety notes

Connection and repair work on the diaphragm metering pump must only be performed by
•
authorized technical personnel.
The power supply plug must always be disconnected before starting any work on electrical
•
components.
Appropriate protective clothing must be worn for any maintenance and repair work.
•
The safety regulations for handling chemicals must always be observed.
•
2.2

Emphases

The emphases indicated here have the following meanings:
Used when improper compliance or non-compliance with the operating instructions, work
CAUTION
instructions, prescribed working routines, et cetera, may result in injury or accidents.
Used when improper compliance or non-compliance with the operating instructions, work
WARNING
instructions, prescribed working routines, et cetera, may result in damage to the equipment.

IMPORTANT
Used when particular attention is required in operating the equipment.
NOTE
Used to draw attention to a noteworthy detail.
2.3

Numberings

 Numberings marked with this sign () describe an activity which must only be performed by
the installer / user.
2.4

Special safety notes for maintenance and repair work

Prior to repair and maintenance work and metering of dangerous media, always rinse the
metering head, relieve the pressure pipe and wear protective clothing (protective goggles,
gloves and apron).
CAUTION
Electronics repairs must only be performed by trained electricians, following the safety
regulations of the professional association VB G 4 & ZH 1/11)!
When opening covers or removing parts, components carrying live voltages may be exposed.
Connection points may also be under live voltages.

IMPORTANT
Only original spare parts must be used for repairs.
417101339_EMP_II_E10 34 Rev. 10-01.19