Improper Use; Personnel Qualifications - Aventics R412004397 Mode D'emploi

46 AVENTICS | Position Controller | R412004397–BDL–001–AC
Notes on Safety
The product is intended for professional use only.
Intended use includes having read and understood this
documentation, especially the chapter "Notes on Safety".
2.3

Improper use

Any use other than that described under Intended use is improper
and is not permitted. If unsuitable products are installed or used
in safety-relevant applications, this may result in unintended
system operating states that could lead to injuries and/or
equipment damage. Therefore, only use a product in safety-
relevant applications if such use is specifically stated and
permitted in the product documentation. For example, in areas
with explosion protection or in safety-related components of
control systems (functional safety). AVENTICS GmbH is not liable
for any damages resulting from improper use. The user alone
bears the risks of improper use of the product.
It is considered improper use when the product
W
is used for any application not stated in these instructions or
W
is used under operating conditions that deviate from those
described in these instructions.
2.4

Personnel qualifications

The work described in this documentation requires basic
electrical and pneumatic knowledge, as well as knowledge of the
appropriate technical terms. In order to ensure safe use, these
activities may therefore only be carried out by qualified technical
personnel or an instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures, due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant regulations pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.