Notes On Safety - Aventics R412004397 Mode D'emploi

44 AVENTICS | Position Controller | R412004397–BDL–001–AC
About This Documentation
1.3.1

Notes on Safety

This documentation contains safety instructions before any
steps that involve a risk of personal injury or damage to
equipment. The measures described to avoid these hazards
must be observed.
Safety instructions are set out as follows:
Hazard type and source
Consequences of non-observance
O
Precautions
W
Safety sign: draws attention to the hazard
W
Signal word: identifies the degree of hazard
W
Hazard type and source: identifies the hazard type and
source
W
Consequences: describes what occurs when the safety
instructions are not complied with
W
Precautions: states how the hazard can be avoided
Table 2: Hazard classes according to ANSI Z535.6-2006
Safety sign, signal word
DANGER
WARNING
CAUTION
NOTICE
SIGNAL WORD
Meaning
Indicates a hazardous situation
which, if not avoided, will certainly
result in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates that damage may be
inflicted on the product or the
environment.