Adjustable Headrest; Adjustable Armrest (Optional) - CASTELLINI SKEMA 6 CART Instructions De Service

4.3

Adjustable headrest

Two types of headrests are available:
1
Cushion secured in place by hand
2
Cushion secured pneumatically
Adjusting the height of the headrest
The head rest blade is positioned through a magnetic clutch. The opera-
tor should pull up and/or push down the headrest until it is in the desired
position.
Adjusting the cushion
• secured in place by hand ( 1 )
Turn the knob [ k ] counter-clockwise and place the cushion in the desired
position. Once adjusted, tighten the knob.
• secured in place pneumatically ( 2 )
Press and hold down the lock button [ u ] and place the cushion in the
desired position. Once adjusted, simply release the button [ u ] to block
the cushion in place.
NOTE: the locking device is active only When the air circuit is
pressurized.
Safety guidelines
ATTENTION!
• Maximum weight supported by headrest: 30 kg.
• Do not change the position of the cushion without deactivating the
locking device.
• In order to prevent the headrest from moving in an uncontrolled manner,
hold it with both hands before disengaging the locking device.

4.4. Adjustable armrest (optional)

Pushing down the adjustable armrest.
Turn the adjustable armrest clockwise to move it down so that the patient
can more easily get on and off the chair.
Taking off the adjustable armrest.
Put the armrest in a vertical position and pull it off.
ATTENTION!
• Maximum weight supported by armrest: 35 kg.
92 92 92 GB EN
SKEMA 6
- OPERATING INSTRUCTION
1
2
k
u