Instrument Board Operation - CASTELLINI SKEMA 6 CART Instructions De Service

Tablette praticien
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Instrument board operation

Layout of instruments
The positions the instruments are placed in on the board are determined
by the customer at the time of order.
Starting the instruments.
• The syringe is always on (see paragraph 5.3.).
• The curing light is turned on with the key When the instrument is
(see paragraph 5.7.).
• Intraoral camera C-U2 and C-U2 PRO turn on when the instrument is
extracted (see paragraph 5.8.).
• Once taken out, the L810 integrated laser is operated with the foot control
(see paragraph 5.9).
• Integrated sensor ZEN-Xi is always on if connected to an external PC
(see paragraph 5.12.).
• Once picked up, all the instruments are operated with the foot control.
(see paragraph 5.2.).
Simultaneous use of the instruments
A device sees that the instruments cannot be used simultaneously.
The fi rst instrument removed is operative while those removed there after
are deactivated by this device.
This device allows the chuck to be replaced in one instrument while another
is used on the patient.
Positioning the instrument board.
The instrument board can move in all directions.
To adjust the height of the board and/or direct it horizontally, simply grasp
the handle [ a ].
NOTE: to release the pneumatic brake of the pantograph arm (or
the column for the CART version) grip the handle placing your thumb on
the tip ( B ).
Instrument return stop arms (only in SPRIDO versions)
If this device is provided, the instrument return arm can be locked in the
instrument extracted position.
When the device is used a click is heard about 2/3 of the total arm travel.
To go back to the original condition, simply move the arm to the end of its
travel [ A ].
Tray holder attached to instrument board.
The instrument holder [ q ] is removable and can be sterilized in autoclave
at 135°.
ATTENTION!
Maximum weight allowed on instrument tray: 2 Kg evenly distribu-
ted.
Cleaning the instrument board handle.
Press the release button [ e ] and then pull the handle [ d ] outwards and
remove it.
Clean the dentist's module handle using a suitable product (see Paragraph
1.4).
SKEMA 6
- OPERATING INSTRUCTION
withdrawn
GB
EN
93
93
93

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Skema 6 cpSkema 6 rs

Table des Matières