Entering The Operator's Personal Identifi Cation; Chronometer - CASTELLINI SKEMA 6 CART Instructions De Service

Tablette praticien
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.1.1.2.4. Entering the operator's personal identifi cation
Perform the following steps from the GENERAL SETTINGS menu:
• Press button MENU to scroll the icons, selecting the one for "Entering the
operator's personal identifi cation".
• Press multifunction button OK to enter the selected submenu.
• To confi rm the personal identifi cation entered (max. 20 letters) simply quit
the submenu by pressing multifunction button ESC.
NOTE: any edited personal identifi cation always refers to the
operator set on the main screen.
How to enter personal identifi cation.
• Press multifunction button (
• Press button MENU to go from one group of letters to another.
• Press buttons INCREASE and/or DECREASE to enter a letter.
NOTE: Uppercase letters are present in each group of letters.
• To delete any errors, use icon (

5.1.1.2.5. Chronometer

This setting is used for all the operators.
Perform the following steps from the GENERAL SETTINGS menu:
• Press button MENU to scroll the icons, selecting the one for "Chrono-
meter".
• Press multifunction button OK to enter the selected submenu.
• Once the time has been set, press multifunction button (
countdown.
NOTE: at this point, it is possible to quit this menu by pressing
multifunction ESC without interrupting countdown.
• Press multifunction button ( ) to interrupt countdown.
• Once the set time has elapsed, the dental unit beeps and the "Chrono-
meter" menu appears on the console display again.
Press multifunction button ESC to shut off the beep.
NOTE: the last time set is saved.
How to set the time.
• To change over from "seconds" to "minutes" or "hours" press button
MENU.
• Press buttons INCREASE and/or DECREASE to change the time.
NOTE: the time which can be set ranges from 00.00.00 to 10.59.59.
• To reset the chronometer, go to "hours" and hold down button DECREASE
until the value reaches 00.
100
100
100
GB
EN
SKEMA 6
- OPERATING INSTRUCTION
) to move the cursor.
) canceling from right to left.
) to start the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Skema 6 cpSkema 6 rs

Table des Matières