Assistant's Board Operation; Assistant's Touchpad - CASTELLINI SKEMA 6 CART Instructions De Service

6. Assistant's board operation

Main features:
• Two articulated arms secure the board (a) to the hydrogroup (b) allowing
it to be placed in the most convenient work position.
The pantograph arm (e) allows the assistant's board to be moved 335
mm vertically through 6 work positions.
NOTE: press button [ h ], found on the pantograph arm, to move
the assistant's board fully down.
• The assistant's board (a) comes with a control console (d) with buttons
used to operate the dental chair and hydrogroup.
• The assistant's board can be equipped with 2 suction tubes and 3 in-
struments.
• The assistant's board comes with sliding rollers (f) that guide and hold
up the suction tubes.
NOTE: the assistant's board is equipped with a safety device that
locks out dental chair movement when the board's arms are obstructed.
Cleaning the sliding rollers.
Push down and take off the sliding rollers (f).
Clean the sliding rollers using a suitable product: refer to Paragraph 1.4.

6.1. Assistant's touchpad

Description of the buttons:
Dental operatory light on/off button
Cup fi ll button
Bowl rinse button
Automatic return position retrieval button
Rinse position button
Programmed position 1 retrieval and chair base up button
Programmed position 2 retrieval and chair back up button
Programmed position 3 retrieval and chair base down button
Programmed position 4 retrieval and chair back down button
Disinfecting procedure start button
NOTE: functioning of buttons that move the chair
• Briefl y pressed: programmed position automatically reached.
• Held down: manual positioning.
142 142 142 GB EN
SKEMA 6
- OPERATING INSTRUCTION