Assistant's Board Operation; Assistant's Touchpad - CASTELLINI SKEMA 6 Instructions De Service

6. Assistant's board operation

Main features:
• Two articulated arms secure the board (a) to the hydrogroup (b) allowing
it to be placed in the most convenient work position.
The pantograph arm (e) allows the assistant's board to be moved 335
mm vertically through 6 work positions.
NOTE: press button [ h ], found on the pantograph arm, to move
the assistant's board fully down.
• The assistant's board (a) comes with a control console (d) with buttons
used to operate the dental chair and hydrogroup.
• The assistant's board can be equipped with 2 suction tubes and 3 in-
struments.
• The assistant's board comes with sliding rollers (f) that guide and hold
up the suction tubes.
NOTE: The assistant's board is equipped with a safety device that
locks out dental chair movement when the board's arms are obstructed.
Cleaning the sliding rollers.
Push down and take off the sliding rollers (f).
Clean the sliding rollers with a suitable product approved against bacteria
and fungi and effective against viruses (including HBV and HIV): see
paragraph 1.4.
NOTE: The product should be sprayed on soft disposable paper
towel or sterile gauze.
ATTENTION!
Do not use acids or harsh products.

6.1. Assistant's touchpad

Description of the buttons:
Dental operatory light on/off button
Cup fi ll button
Bowl rinse button
Automatic return position retrieval button
Rinse position button
Programmed position 1 retrieval and chair base up button.
Programmed position 2 retrieval and chair back up button.
Programmed position 3 retrieval and chair base down button.
Programmed position 4 retrieval and chair back down button
Disinfecting procedure start button
NOTE: functioning of buttons that move the chair
• Briefl y pressed: programmed position automatically reached.
• Held down: manual positioning.
SKEMA 6
- OPERATING INSTRUCTION
GB GB 127 127 127