Cleaning The Turbine Return Air Fi Lter; Metasys Amalgam Separator; Durr Amalgam Separator; Castellini Dental Chair Model New Skema - CASTELLINI SKEMA 6 Instructions De Service

9.6. Cleaning the turbine return air fi lter
Monthly check the oil container fi lter [ g ] present in the turbine's return
air line.
If necessary, replace the fi lter element (code 97290014).

9.7. METASYS amalgam separator

The maintenance instructions for the METASYS amalgam separator are
enclosed with the equipment if the equipment comes with this type of
separator.
The separator's control device is located in the hydrogroup
ATTENTION!
Always wear gloves to prevent contact with infected material when
cleaning the separator.
ATTENTION!
When disposing one-time use containers full of amalgam, observe
current local and national laws.

9.8. DURR amalgam separator

The maintenance instructions for the DURR amalgam separator are
enclosed with the equipment if the equipment comes with this type of
separator.
The separator's control device is located in the hydrogroup
ATTENTION!
Always wear gloves to prevent contact with infected material when
cleaning the separator.
ATTENTION!
When disposing one-time use containers full of amalgam, observe
current local and national laws.

9.9. CASTELLINI dental chair model NEW SKEMA

The dental chair NEW SKEMA does not need any special maintenance.
In any case, operation should be checked by CASTELLINI authorized
personnel once a year.
SKEMA 6
- OPERATING INSTRUCTION
GB GB 143 143 143