2. Description of the equipment
2.1. Nameplate
Dental operatory
The nameplate is found on the arm between the dental chair and hydro-
group.
Data given on plate:
• Manufacturer's name
• Name of equipment
• Voltage
• Type of current
• Frequency
• Maximum power absorbed
• Serial number
• Month and year of construction
2.2. Dental units
Dental units SKEMA 6 are available in the following versions:
RS version
"RS" version instrument board (instruments will return to their original
position through the pulling action of the spring-operated arms) attached
to a double supporting arm, one of which is articulated while the other is
autobalancing.
Description of equipment:
[ a ]
Hydrogroup
[ b ]
Adjustable arm
[ c ]
Instrument board
[ d ]
Doctor's console
[ e ]
Tray holder
[ f ]
Assistant's board
[ g ]
Assistant's control console
[ h ]
Utility service center
[ i ]
Multifunction foot control
[ l ]
Water to cup
[ m]
Bowl
[ n ]
Autobalancing arm
[ q ]
Instrument tray on assistant's board (optional)
CP version
Instrument board version CP (the instruments are placed vertically in
position) mounted on double arm of which one is articulated and self-
balanced.
Description of equipment:
[ a ] Hydrogroup
[ b ] Adjustable arm
[ c ] Instrument board
[ d ] Doctor's console
[ e ] Tray holder ( optional ).
[ f ] Assistant's board
[ g ] Assistant's control console
[ h ] Utility service center
[ i ] Multifunction foot control
[ l ] Water to cup
[ m ] Bowl.
[ n ] Autobalancing arm
[ q ] Instrument tray on assistant's board (optional)
[ r ] Viewer for panoramic x-rays ( optional ).
SKEMA 6
- OPERATING INSTRUCTION
GB
GB
81
81
81