CASTELLINI SKEMA 6 Instructions De Service page 130

Setting bowl fl ushing.
Water can be delivered to the bowl either in manual (with the ON/OFF
button) or timed.
See paragraph 5.1.1.4.1 to set the desired mode of operation and water
delivery time.
Setting automatic bowl fl ushing.
The bowl is automatically fl ushed in the following cases:
• when button "Water to cup" is pressed,
• when button "Dental chair automatic return" is pressed,
• when button 'Rinse position" is pressed.
To change operation see paragraph 5.1.1.4.1.
Powered bowl movement.
Bowl counter-clockwise button.
Bowl clockwise button.
NOTE: The bowl can also be moved directly by hand.
Automatic bowl motion (only with powered bowl).
The bowl moves automatically in the following cases:
• press button "Dental chair rinse position",
NOTE: in this case, the position of the bowl can also be set (see
paragraph 5.1.2.).
• by pressing button "Dental chair reset position",
• by pressing the button to retrieve 1 of the 4 programs available.
See paragraph 5.1.1.4.3 for information on how to modify operation.
Removing the spouts, bowl and bowl fi lter.
• Pull up the spouts [l] and [n] and remove them.
• Pull up the fi lter [ q ] and its cover [ p ] to remove them.
• Remove the bowl [ m ] by fi rst turning it counter-clockwise.
Disinfecting and cleaning.
ATTENTION!
Always wear gloves to prevent contact with infected material When
cleaning the bowl and bowl fi lter.
The parts are to be cleaned daily at the end of each work day.
• Spouts and bowl: thoroughly wash with a specially formulated cleaner.
• Bowl fi lter: clean with running water and commercially-available cleaning
products.
ATTENTION!
Do not use acids or harsh products.
130 130 130 GB GB
SKEMA 6
- OPERATING INSTRUCTION
n
p
q
m