Setting Water To Bowl; Setting Water To Cup - CASTELLINI SKEMA 6 CART Instructions De Service

5.1.1.4.1. Setting water to bowl

This setting is used for all the operators.
Perform the following steps from the HYDROGROUP SETTINGS menu:
• Press button MENU to scroll the icons, selecting the one for " Setting
water to bowl"
• Press multifunction button OK to enter the selected submenu which contains
the following icons:
Setting of timed or ON/OFF bowl fl ushing
Bowl fl ushing controller
with dental chair brought to rinse position
Bowl fl ushing time setting
Bowl fl ushing controller
with dental chair brought to reset position
A Bowl fl ushing controller
with cup call
Automatic bowl fl ushing with return to the dental chair rinsing
position
• Press button MENU to go from one icon to another.
• Press buttons INCREASE and/or DECREASE to select/deselect a controller
or change the bowl fl ushing time.
• To confi rm the settings, simply quit the submenu by pressing multifunction
button ESC.

5.1.1.4.2. Setting water to cup

This setting is used for all the operators.
Perform the following steps from the HYDROGROUP SETTINGS menu:
• Press button MENU to scroll the icons, selecting the one for " Setting
water to cup"
• Press multifunction button OK to enter the selected submenu which contains
the following icons:
Cup fi lling level setting
Temperature of water to cup setting
• Press button MENU to go from one icon to another.
• Press buttons INCREASE and/or DECREASE to change the water delivery
time to the cup or the temperature.
NOTE: the temperature of the water to the cup can be set as
follows:
COLD water (BLUE)
WARM water (ORANGE)
HOT water (RED)
• To confi rm the settings, simply quit the submenu by pressing multifunction
button ESC.
SKEMA 6
- OPERATING INSTRUCTION
GB EN 105 105 105