Adjusting The Display Brightness; Language Selection - CASTELLINI SKEMA 6 CART Instructions De Service

5.1.1.2.1. Adjusting the display brightness

This setting is used for all the operators.
Perform the following steps from the GENERAL SETTINGS menu:
• Press button MENU to scroll the icons and select the one for "Display
brightness adjustment" .
• Press multifunction button OK to enter the selected submenu.
• Adjust the display brightness with the increase and/or decrease buttons.
NOTE: the value which can be entered ranges from 1 to 10.
Use the fast selection buttons to automatically set the following values:
- MAX button: level 10,
- MED button: level 5,
- MIN button: level 1.
• Once the brightness has been adjusted, press function key ESC to quit
the submenu automatically saving the brightness setting.

5.1.1.2.2. Language selection

This setting is used for all the operators.
Perform the following steps from the GENERAL SETTINGS menu:
• Press button MENU to scroll the icons, selecting the one for " Language
selection" .
• Press multifunction button OK to enter the selected submenu.
• Use button MENU to scroll the language icons.
• Once the desired language has been found, press multifunction button ESC
to quit the submenu automatically saving the data entered.
98 98 98 GB EN
SKEMA 6
- OPERATING INSTRUCTION