Yamaha WaveRunner FX140 Manuel D'entretien page 736

TRBL
ANLS
4. Stationary test: With the engine off, ignition, fuel injection, and the electric fuel pump are
checked. These tests can be performed quickly.
5. Active test: With the engine running, each firing cylinder drops and the engine speed is
checked for changes to determine if the cylinder is malfunctioning. These tests can be per-
formed quickly.
6. Data logger: From the data stored in the ECM, at least two items of 78 seconds of recorded
data are displayed on a graph. In addition, the operating time as compared to the engine speed
and the total operating time are displayed. This allows you to check the operating status of the
engine.
7. ECM No.: The ECM part number is displayed.
CONTENTS
1. Software (1)
2. Adapter (1)
3. Communication cable (1)
4. Instruction Manual (1)
5. Installation Manual (1)
(with CD-ROM)
INTRODUCTION
1 2 3
Fig. 1
9-2
YAMAHA DIAGNOSTIC SYSTEM
for Watercraft
YAMAHA DIAGNOSTIC SYSTEM
INSTRUCTION MANUAL
INSTALLATION MANUAL
60E-2819U-10
4 5
E
for Watercraft
60E-2819K-10