Bearing Installation; Oil Seal Installation - Yamaha WaveRunner FX140 Manuel D'entretien

JET
PUMP
BEARING HOUSING
a

Bearing installation

1. Install:
• Circlip (rear)
2. Install:
• Bearing
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
NOTE:
Support the intermediate housing with steel
blocks 1 and press the bearing.

Oil seal installation

1. Install:
• Oil seal
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
NOTE:
Before installing the oil seal, lubricate the clip
glove with water resistant grease.
Distance a:
6.8–7.2 mm (0.27–0.28 in)
2. Install:
• Intermediate drive shaft
Distance a:
45.5–46.5 mm (1.79–1.83 in)
NOTE:
Support the intermediate housing with steel
blocks 1 and press the driven coupling shaft.
6-28
E