IGF 2700/PL10/8 Mode D'emploi Et D'entretien page 54

SET IN FUNCTION ART. 2700
To start the machine, as seen, it is possible to choose between two modalities:
1° Activate the current to the machine controls:
Push the button ON to give voltage to the controls panel;
2° Select the working speed:
Push the button MODE to select the working speed;
Set the speed, buttons "+" or "-", between the foreseen 8, desired for the rotation;
3° Select the working time:
Push the button MODE to select the working speed;
Set the duration, buttons "+" or "-", maximum 60 minutes with step 1 minute.
Start the working:
Push the button START, to start the working.
The settings must be performed before the working starting: only the rotation speed setting is performable during the working,
but doesn't change the residual time for the working.
10-2009-IMPASTATRICE-ART 2700-A5.doc
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
23 30