Plates - IGF 2700/PL10/8 Mode D'emploi Et D'entretien

RISK DUE TO THE LACKED FUNCTIONING OF THE SUCTION CENTRALIZED SYSTEM FORESEEN FROM
THE USER
During the loading operations of the dry products in the bowl or during the normal working some hanged
dusts can be determined (for example flour dust).
The ingredients and the packaged products must be handled with care, reducing at minimum the height over
the bowl from which they are poured.
The packages must be opened with care in the bowl inferior part to promote the flour dust release in the less
possible time.
During the flour loading and during the machine functioning normal cycle, a suction centralized system
must be prepared and functioning, placed in the machine superior part.
In any case, against the residual risk due to the lacked functioning of the suction system, the operator and
the maintenance man besides to be adequately informed and trained, every time that approach in the working
zones, must use respiratory ways protection devices, as for example anti dust respiratory masks or other
suitable devices.
Besides, the working must be immediately interrupted and the internal maintenance service must be activated
to function the suction system.
The same individual protection devices must be used from the operator and from the maintenance man when
perform the machine cleaning operations.

4.4. PLATES

The plates and the signs must always be well visible and must not be ever removed.
The plates and the signs are safety instrumentation and must not be considered with superficiality.
The user is kept to change immediately all safety plates and/or warnings that after the wear can become
illegible
LIST AND MEANING OF THE PRESENT PLATES
Gloves with Safety footwear
metallic fibers
WITH THE REMOVED FIXED SHELTERS
DANGEROUS MOVING ELEMENTS IN
MOVEMENT ARE PRESENT.
BEFORE TO ACCESS TO THE DANGEROUS
MOVING ELEMENTS WAIT AT LEAST 10
SECONDS AFTER THE FEEDING ENERGY
INTERRUPTION E
10-2009-IMPASTATRICE-ART 2700-A5.doc
Body protection Don't remove
the safety
devices
DEVICE IN VOLTAGE ALSO WITH OPENED
TO REMOVE VOLTAGE WORK ON THE
SECTIONING DEVICE (disconnect the plug from
ORIGINAL INSTRUCTIONS TRANSLATION
Machine for food RAEE
use
400V 50Hz
DOOR
the socket)
Pag. di
14 30