Assembly / Disassembly; Devices And Control Functions - IGF 2700/PL10/8 Mode D'emploi Et D'entretien

5.5. ASSEMBLY / DISASSEMBLY

The assembly / disassembly operations of any machine part are performed with the stopped machine and
with the plug disconnected from the socket, or with the sectioning device in OFF.
TOOLS CHANGE
In the machine with tip-up head, the tool can be removed manually for its change and cleaning.
The tools change must happen as showed follow (cfr. annexed):
1. pull the unblocking knob of the tip-up head;
2. lift manually the tip-up head up to its possible highest position;
3. take the tool inserted in the machine dinghy;
4. lift manually the tool blocking ferrule and extract the tool;
5. introduce the new tool in the dinghy so that the mechanical hook is inserted and that the ferrule returns in its initial rest
position;
6. lower manually the tip-up head up to its possible lowest position so that the mechanical hook is inserted and the knob
returns in its initial rest position;
BOWL CHANGE
In the machine with tip-up head, the bowl can be removed manually for the dough unloading, for its change and cleaning. The
tools change must happen as showed here follow (cfr. annexed):
1. pull the unblocking knob of the tip-up head;
2. lift manually the tip-up head up to its possible highest position;
3. take the bowl and rotate in anticlockwise up to its complete unhooking,
4. extract manually the bowl (if of mass superior to 25kg use adequate lifting and hooking systems);
5. after having changed or emptied completely the bowl, place it near the hooking system and rotate it in clockwise up to
its complete block;
6. lower manually the tip-up head up to its possible lowest position so that the mechanical hook is inserted and the knob
returns in its initial rest position;

5.6. DEVICES AND CONTROL FUNCTIONS

Here follow the main control devices are showed (cfr. annexed):
CONTROL
GENERAL SWITCH
BUTTON ON / OFF
MODE BUTTON
[ "+" / "-"]
SELECTOR BUTTONS
START / STOP
BUTTON
MUSHROOM BUTTON
10-2009-IMPASTATRICE-ART 2700-A5.doc
ELECTRIC MIXER ART. 2700
ACTION
(I) FEEDING / (OR) SECTIONING
(ON) DRIVES THE MACHINE
MOVEMENT
(OFF) STOPS THE MACHINE
MOVEMENT
"+"
CHANGE THE BUTTONS CHOICE AND
:
THE SELECTOR BETWEEN
" ";
SETTINGS FOR SPEED CHOICE
"
TIME SETTINGS OF THE WORKING DURATION
,
WORKING DURATION SETTING THROUGH THE
"+" (
BUTTONS WITH SYMBOL INCREASE
"-" (
BUTTON WITH SYMBOL DECREASING
THE VISOR DISPLAYS THE SET VALUE
(1 ÷ 8)
SPEED IS PRECEDED FROM THE
"P"
SYMBOL
(START) /
ACTIVATE DISACTIVATE
THE ROTATING PARTS MOVEMENT
STOPS THE MACHINE
EMERGENCY CONDITION.
ORIGINAL INSTRUCTIONS TRANSLATION
POSITION
MACHINE SIDE
CONTROLS PANEL
"-"
OF CONTROLS PANEL
"
CONTROLS PANEL
),
THE
) –
,
THE SET
(STOP)
CONTROLS PANEL
IN MACHINE SUPERIOR
COVER
Pag.
20
di
30