Aventics HF03 LG Série Mode D'emploi page 71

AVENTICS | CANopen, CANopen sb | R412009415–BDL–001–AE
8
7
6
Fig. 2: Bus coupler overview
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS IN) connection for the bus coupler to control the valves
4 X71 (BUS IN) connection for the CANopen module to control the valves
5 X10 (POWER) connection to supply power to the valve solenoids
6 Screw cap A 0.6 + 0.2 Nm: S1, S2 rotary switches (to set the station address) and
S3 DIP switch (mode setting)
7 Screw cap A 0.6 + 0.2 Nm: S1, S2 rotary switches (to set the station address) and
S3 DIP switch (mode setting)
8 FE connection 4+ 0.5 Nm
9 Pocket for slide-in labels (see "Spare parts and accessories" on page 97)
1)
For plug assignment, see pages 77 and 78.
5.2 Device components
5.2.1 Bus coupler
9
Device description
1
2
3
4
5
1)
1)
71