Aventics HF03 LG Série Mode D'emploi page 68

68 AVENTICS | CANopen, CANopen sb | R412009415–BDL–001–AE
Applications
During operation
During cleaning
W
Make sure that there is a sufficient exchange of air or
enough cooling if your valve system has any of the
following:
– Full equipment status
– Continuously loaded solenoid coils
W
Never use solvents or strong detergents. Only clean
the device using a slightly damp cloth. Only use
water and, if necessary, a mild detergent.
3 Applications
The bus coupler is used to control valves via the CANopen
fieldbus system.
The bus coupler is designed for use as a slave only on a
CANopen bus system in accordance with EN 50325-4.
4 Delivery Contents
The following is included in the delivery contents of a
configured valve system:
W
1 valve system according to configuration and order
W
1 set of operating instructions for the valve system
W
1 set of operating instructions for the bus coupler
The following is included in the delivery contents of a bus
coupler parts kit:
W
1 bus coupler with seal and 2 mounting screws
W
1 set of operating instructions for the bus coupler
The VS is individually configured. You can find the
exact configuration in the AVENTICS Internet
configurator under your order number.