2
2
2
EXHAUST PIPE AND MUFFLER
4. Install:
• Muffler cover 1
1
5. Tighten:
• Muffler cover bolts 2
2
Tightening steps:
• Finger tighten the muffler cover bolts.
• Tighten the bolts towards the rear of the
machine to the specified torque.
• Tighten the bolts towards the front of the
machine to the specified torque.
5-13
ENG
Muffler cover bolt:
11 Nm (1.1 m · kg, 8.0 ft · lb)