3
1
3
4
2
2
3
1
REMOVAL
1. Straighten the lock washer tabs.
INSPECTION
1. Inspect:
• Handlebar 1 (RS90/RS90R/RSG90/RST90/
2
RST90TF)
• Handlebar 2 (RS90M)
• Steering column 1 3
• Steering column 2 4
Bends/cracks/damage → Replace.
4
WARNING
Do not attempt to straighten a bent column.
This may dangerously weaken the column.
2. Inspect:
• Bearings (steering column) 1
• Collars 2
Wear/damage → Replace.
• Steering column 1 3
(bearing contact surfaces)
1
• Steering column 2 4
(bearing contact surfaces)
Scratches/wear/damage → Replace.
3. Inspect:
• Relay rod 1
• Tie rods 2
• Steering shaft 3
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten bent rods. This
may dangerously weaken the rods.
3-7
CHAS
STEERING