Speedometer Unit Inspection - Yamaha RS90K Manuel D'atelier

SPEEDOMETER UNIT INSPECTION

SPEEDOMETER UNIT INSPECTION
1. Inspect:
Inspection steps:
• Check that the main switch is set to "OFF", the
• Set the engine stop switch 1 to the on position
• Set the main switch to "ON" while pressing the
NOTE:
Continue to press the thumb warmer adjustment
switch for at least 8 seconds after the main switch
3 is set to "ON".
• Check that the speedometer unit, headlights,
Light does not come on → Replace the bulb.
Nothing appears in the speedometer unit LCD
→ Replace the speedometer unit.
• Set the main switch to "OFF" and check that the
• Set the engine stop switch to the off position
2-54
• Speedometer unit
thumb warmer adjustment
pressed, and the speedometer unit, headlights,
and taillights are off.
(pulled out).
"LO" side of the thumb warmer adjustment
switch 2.
and taillights come on.
speedometer unit, headlights, and taillights go
off.
(pushed in).
INSP
ADJ
switch is not